top of page

PATRIOT BLAST RECYCLED GLASS

Glass1.jpg
Both-Bags-Glass.jpg

Available in 60 lb bags and 1.5 and 2 ton Jumbo Sacks

Green and clean, versatile, and ideal for dustless blasting! Crushed Glass is a cost-effective general-purpose abrasive used in a wide variety of applications, from rust and mill scale removal to delicate restoration work. Crushed Glass is a manufactured abrasive made from 100% recycled glass, and is ideal for concrete applications and brick and limestone restoration work. Crushed Glass produces a consistent profile and is particularly suited to softer substrates. Although crushed glass typically produces higher dusting due to its higher friability, it also results in lower particle embedment than most abrasives and leaves a very clean white metal finish.  Learn more about Crushed Glass abrasives in the Learning Center.

 

See our crushed glass in action here!

​

​

Physical Characteristics
​

Shape: Angular to Sub-Angular

Hardness: 5.0-6.0 Mohs

Bulk Density: 80 lbs./cu. ft.

Specific Gravity: 2.2 g/cc

Free Silica: No Free Silica

Recycled Abrasive

​

​

​

Available Sizes & Densities

​

1230-Glass-700.jpg
Medium-1230 Glass 

Typical Profile: 2.0-4.5 mils

Used for general purpose applications. Removal of mill scale, rust and paint stripping on structural steel, ships, bridges.

2030-Glass-700.jpg
Fine - 2030 Glass 

Typical Profile: 1.5-3.5 mils

Used for light paint and rust removal and new construction application. Removal of light mill scale, light rust and light paint stripping on new structural steel, bridges, frames and trucks.

3060-Glass-700.jpg
X-fine - 3060 Glass 

Typical Profile: 1.5-3.0 mils

Used for cleaning of surfaces of light paint and rust removal application to create a smooth finish. Cleaning of light mill scale, light rust and light paint stripping.

bottom of page